Lug cábla
Sonraí Teicniúla
Ábhar: E-Cu
Cóireáil dromchla: Stán-phlátáilte
Maoin Táirge: Úsáidtear é chun an deireadh seoltóir copair a nascadh.Tá fuinneog féachana aige chun suíomh an tseoltóra a sheiceáil.
| Mionsamhail | L Toisí (mm) d Φ | ||
| JM (JGK) 6-5 | 25 | 3.7 | 5.2 |
| JM (JGK) 6-6 | 25 | 3.7 | 6.5 |
| JM (JGK) 6-8 | 25 | 3.7 | 8.4 |
| JM (JGK) 10-5 | 26 | 4.5 | 5.3 |
| JM (JGK) 10-6 | 26 | 4.5 | 6.5 |
| JM (JGK) 10-8 | 26 | 4.5 | 8.4 |
| JM (JGK) 10-10 | 28 | 4.5 | 10.3 |
| JM (JGK) 16-6 | 28.5 | 5.7 | 6.5 |
| JM (JGK) 16-8 | 30.5 | 5.7 | 8.4 |
| JM (JGK) 16-10 | 31 | 5.7 | 10.5 |
| JM (JGK) 25-6 | 35 | 7.2 | 6.5 |
| JM (JGK) 25-8 | 35 | 7.2 | 8.4 |
| JM (JGK) 25-10 | 35 | 7.2 | 10.5 |
| JM (JGK) 35-6 | 37.5 | 8.5 | 6.5 |
| JM (JGK) 35-8 | 38 | 8.5 | 8.5 |
| JM (JGK) 35-10 | 39 | 8.5 | 10.5 |
| JM (JGK) 35-12 | 39 | 8.5 | 13 |
| JM (JGK) 50-6 | 43.5 | 9.8 | 6.5 |
| JM (JGK) 50-8 | 45 | 9.8 | 8.5 |
| JM (JGK) 50-10 | 45 | 9.8 | 10.5 |
| JM (JGK) 50-12 | 45 | 9.8 | 13 |
| JM (JGK) 50-14 | 45 | 9.8 | 14.5 |
| JM (JGK) 70-8 | 50 | 11.5 | 8.5 |
| JM (JGK) 70-10 | 51.5 | 11.5 | 10.5 |
| JM (JGK) 70-12 | 51.5 | 11.5 | 13 |
| JM (JGK) 95-8 | 58.5 | 13.7 | 8.5 |
| JM (JGK) 95-10 | 58.5 | 13.7 | 10.5 |
| JM (JGK) 95-12 | 58.5 | 13.7 | 13 |
| Mionsamhail | L Toisí (mm) Φ d | ||
| JM (JGK) 120-10 | 63.5 | 15 | 10.5 |
| JM (JGK) 120-12 | 65 | 15 | 13 |
| JM (JGK) 120-14 | 65 | 15 | 14.7 |
| JM (JGK) 120-16 | 66.5 | 15 | 17 |
| JM (JGK) 150-10 | 73 | 16.7 | 10.5 |
| JM (JGK) 150-12 | 73 | 16.7 | 13 |
| JM (JGK) 150-14 | 73 | 16.7 | 14.7 |
| JM (JGK) 150-16 | 73 | 16.7 | 17 |
| JM (JGK) 185-10 | 80 | 19.2 | 10.5 |
| JM (JGK) 185-12 | 80 | 19.2 | 13 |
| JM (JGK) 185-14 | 80 | 19.2 | 14.7 |
| JM (JGK) 185-16 | 80 | 19.2 | 17 |
| JM (JGK) 240-12 | 92.5 | 21 | 13 |
| JM (JGK) 240-14 | 92.5 | 21 | 14.7 |
| JM (JGK) 240-16 | 92.5 | 21 | 17 |
| JM (JGK) 240-20 | 94.5 | 21 | 21 |
| JM (JGK) 300-12 | 102 | 24 | 13 |
| JM (JGK) 300-16 | 102 | 24 | 17 |
| JM (JGK) 300-20 | 105 | 24 | 21 |
| JM (JGK) 400-16 | 114 | 27 | 17 |
| JM (JGK) 400-20 | 116 | 27 | 21 |
| JM (JGK) 500-16 | 127 | 30 | 17 |
| JM (JGK) 500-20 | 127 | 30 | 21 |
| JM (JGK) 630-16 | 140 | 35 | 17 |
| JM (JGK) 630-20 | 140 | 35 | 21 |
| JM (JGK) 630-22 | 140 | 35 | 23 |
| JM (JGK) 800-22 | 170 | 39 | 23 |
| JM (JGK) 1000-22 | 200 | 44 | 23 |
Sonraí Teicniúla
Ábhar: E-Cu
Cóireáil dromchla: Stán-phlátáilte
Maoin Táirge: Úsáidtear é chun an deireadh seoltóir copair a nascadh.Tá fuinneog amhairc aige chun suíomh an tseoltóra a sheiceáil. Agus tá béal an chlogáin deartha go speisialta chun freastal ar sheoltóirí solúbtha snáithe mín.Toisc go bhfuil trastomhas níos mó ag cáblaí srathaithe míne ná na gnáthchail.Agus is gnách go n-imríonn siad amach tar éis dóibh a bheith bainte, lugs JGB a tonnnaíonn na snáitheanna isteach sa mhála agus a chuireann isteach an seoltóir go héasca.
| Mionsamhail | L Toisí (mm) d Φ | ||
| JM (JGK) 6-5 | 25 | 3.7 | 5.2 |
| JM (JGK) 6-6 | 25 | 3.7 | 6.5 |
| JM (JGK) 6-8 | 25 | 3.7 | 8.4 |
| JM (JGK) 10-6 | 26 | 4.5 | 6.5 |
| JM (JGK) 10-8 | 26 | 4.5 | 8.4 |
| JM (JGK) 10-10 | 28 | 4.5 | 10.3 |
| JM (JGK) 16-6 | 28.5 | 5.7 | 6.5 |
| JM (JGK) 16-8 | 30.5 | 5.7 | 8.4 |
| JM (JGK) 16-10 | 31 | 5.7 | 10.5 |
| JM (JGK) 25-6 | 33.5 | 7.2 | 6.5 |
| JM (JGK) 25-8 | 35 | 7.2 | 8.4 |
| JM (JGK) 25-10 | 35 | 7.2 | 10.5 |
| JM (JGK) 35-6 | 37.5 | 8.5 | 6.5 |
| JM (JGK) 35-8 | 38 | 8.5 | 8.5 |
| JM (JGK) 35-10 | 39 | 8.5 | 10.5 |
| JM (JGK) 35-12 | 39 | 8.5 | 13 |
| JM (JGK) 50-6 | 43.5 | 9.8 | 6.5 |
| JM (JGK) 50-8 | 45 | 9.8 | 8.5 |
| JM (JGK) 50-10 | 45 | 9.8 | 10.5 |
| JM (JGK) 50-12 | 45 | 9.8 | 13 |
| JM (JGK) 70-8 | 50 | 11.5 | 8.5 |
| JM (JGK) 70-10 | 51.5 | 11.5 | 10.5 |
| JM (JGK) 70-12 | 51.5 | 11.5 | 13 |
Sonraí Teicniúla
Ábhar: E-Cu;Al- 99.6%
Cóireáil dromchla: Bright
Réadmhaoin na dtáirgí: Mar gheall ar an éifeacht cúplála nuair a thagann Alúmanam i dteagmháil le Copar, tarlóidh creimeadh i mbeagán ama.Faoi láthair is é an réiteach is fearr ná nascóirí bimetal Alúmanam-Copper a úsáid.Ba chóir lug bimetal a úsáid le haghaidh foirceannadh.Tá an táthú frithchuimilte déanta go maith.Agus tá a caipín bairille líonta le cumaisc chomhpháirteach chun ocsaídiú a sheachaint.
| Mionsamhail | Toisí L(mm) | |||
| d | B | Φ | ||
| DTL 10-6 | 62 | 4.8 | 13.5 | 6.5 |
| DTL 16-8 | 70 | 5.8 | 16 | 8.5 |
| DTL 25-8 | 75 | 7.2 | 17.5 | 8.5 |
| DTL 35-10 | 85 | 8.5 | 20 | 10.5 |
| DTL 50-10 | 90 | 9.7 | 23 | 10.5 |
| DTL 70-12 | 102 | 11.5 | 26 | 12.5 |
| DTL 95-12 | 112 | 13.5 | 28 | 12.5 |
| Mionsamhail | Toisí(mm) | |||
| L | d | B | Φ | |
| DTL 120-14 | 120 | 15 | 31 | 14.5 |
| DTL 150-14 | 125 | 16.5 | 35 | 14.5 |
| DTL 185-16 | 133 | 18.5 | 37.5 | 17 |
| DTL 240-16 | 140 | 21 | 40 | 17 |
| DTL 300-18 | 160 | 23.5 | 44.5 | 18.5 |
| DTL 400-20 | 170 | 27 | 50 | 21 |
| DTL 500-20 | 225 | 29 | 60 | 21 |
Sonraí Teicniúla
Réadmhaoin na dtáirgí: Mar gheall ar an éifeacht cúplála nuair a thagann Alúmanam i dteagmháil le Copar, tarlóidh creimeadh i mbeagán ama.Faoi láthair is é an réiteach is fearr ná nascóirí dé-mhiotail Alúmanam-Copper a úsáid.Ba chóir lug bimetal a úsáid le haghaidh foirceannadh.Tá an táthú frithchuimilte déanta go maith.Agus tá a caipín bairille líonta le cumaisc chomhpháirteach chun ocsaídiú a sheachaint.Is é an cineál tástála a leanúint IEC 61238-1.
| Múnla DTL-2-16-11 | P±0.3 D±0.5 d Toisí(mm)0.3 W±0.5 S±0.3 ±0.3 L±3 L1± | ||||||
| Φ11 | Φ16 | Φ6 | 80 | 40 | Φ20 | 3 | |
| DTL-2-25-11 | Φ11 | Φ16 | Φ7 | 80 | 40 | Φ20 | 3 |
| DTL-2-35-11 | Φ11 | Φ16 | Φ8.5 | 80 | 40 | Φ20 | 3 |
| DTL-2-50-13 | Φ13 | Φ20 | Φ10 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-70-13 | Φ13 | Φ20 | Φ11.5 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-95-13 | Φ13 | Φ20 | Φ13.5 | 90 | 43 | Φ25 | 4.5 |
| DTL-2-120-13 | Φ13 | Φ25 | Φ15 | 115 | 59 | Φ30 | 5.5 |
| DTL-2-150-13 | Φ13 | Φ25 | Φ16.5 | 115 | 59 | Φ30 | 5.5 |
| Múnla DTL-2-185-13 | P±0.3 D±0.5 d Toisí(mm)0.3 W±0.5 S±0.3 ±0.3 L±3 L1± | ||||||
| Φ13 | Φ32 | Φ18.5 | 122 | 60 | Φ30 | 6 | |
| DTL-2-240-13 | Φ13 | Φ32 | Φ21 | 122 | 60 | Φ35 | 6 |
| DTL-2-300-13 | Φ13 | Φ34 | Φ23.5 | 128 | 65 | Φ35 | 6 |
| DTL-2-400-17 | Φ17 | Φ40 | Φ26 | 160 | 90 | Φ36 | 6 |
| DTL-2-500-17 | Φ17 | Φ40 | Φ30 | 160 | 95 | Φ36 | 6 |
| DTL-2-630-17 | Φ17 | Φ47 | Φ33.5 | 205 | 95 | Φ60 | 10 |
| DTL-2-800 | Φ17 | Φ60 | Φ38.5 | 240 | 110 | Φ80 | 10 |
| DTL-2-1000 | Φ17 | Φ60 | Φ43.5 | 240 | 110 | Φ80 | 10 |
Sonraí Teicniúla
Ábhar: E-Cu
Cóireáil dromchla: Stán-phlátáilte
Maoin an táirge: Úsáidtear é chun comhpháirteach seoltóir copair a nascadh.
| Múnla GTY-1-1.5 | Toisí LD(mm)d | |
| 20 | 1.9 | |
| GTY-1-2.5 | 20 | 2.8 |
| GTY-1-4 | 20 | 3.2 |
| GTY-1-6 | 25 | 3.7 |
| GTY-1-10 | 30 | 4.5 |
| GTY-1-16 | 35 | 5.7 |
| GTY-1-25 | 40 | 7.2 |
| GTY-1-35 | 45 | 8.5 |
| GTY-1-50 | 50 | 9.8 |
| GTY-1-70 | 55 | 11.5 |
| GTY-1-95 | 60 | 13.7 |
| Múnla GTY-1-120 | Toisí LD(mm)d | |
| 65 | 15 | |
| GTY-1-150 | 70 | 16.7 |
| GTY-1-185 | 75 | 19.2 |
| GTY-1-240 | 80 | 21 |
| GTY-1-300 | 85 | 24 |
| GTY-1-400 | 90 | 27 |
| GTY-1-500 | 100 | 30 |
| GTY-1-630 | 110 | 35 |
| GTY-1-800 | 150 | 39 |
| GTY-1-1000 | 170 | 44 |
Sonraí Teicniúla
Ábhar: E-Cu;Al- 99.6%
Cóireáil dromchla: Bright
Maoin an táirge: Mar gheall ar an éifeacht cúplála nuair a thagann Alúmanam i dteagmháil le Copper, tarlóidh creimeadh i mbeagán ama.Faoi láthair is é an réiteach is fearr ná nascóirí bimetal Alúmanam-Copper a úsáid.Ba cheart nasc bimetal a úsáid le haghaidh comhpháirteacha.
Tá an táthú frithchuimilte déanta go maith.Agus líontar a bairille alúmanaim caipínithe le cumaisc chomhpháirteach chun ocsaídiú a sheachaint.
| Múnla GTL-AL25/CU16 | L Toisí(mm) d d1 | ||
| 70 | 6.8 | 5.5 | |
| GTL-AL35/CU16 | 76 | 8 | 5.5 |
| GTL-AL35/CU25 | 82 | 8 | 7 |
| GTL-AL50/CU25 | 85 | 9.8 | 7 |
| GTL-AL50/CU35 | 90 | 9.8 | 8.2 |
| GTL-AL70/CU35 | 95 | 11.2 | 8.2 |
| GTL-AL70/CU50 | 100 | 11.2 | 10 |
| GTL-AL95/CU50 | 105 | 13.2 | 10 |
| GTL-AL95/CU70 | 110 | 13.2 | 11.5 |
| GTL-AL120/CU70 | 116 | 14.7 | 11.5 |
| Múnla GTL-AL120/CU95 | L Toisí(mm) d1d | ||
| 118 | 14.7 | 13.5 | |
| GTL-AL150/CU95 | 120 | 16.3 | 13.5 |
| GTL-AL150/CU120 | 122 | 16.3 | 15.5 |
| GTL-AL185/CU120 | 128 | 18.3 | 15.5 |
| GTL-AL185/CU150 | 130 | 18.3 | 17 |
| GTL-AL240/CU150 | 132 | 21 | 17 |
| GTL-AL240/CU185 | 135 | 21 | 19 |
| G TL-AL240/CU240 | 140 | 21 | 21.5 |
| GTL-AL300/CU240 | 145 | 23.3 | 21.5 |
| GTL-AL300/CU300 | 150 | 23.3 | 21.5 |
